3. Technical Principles of Hot Press Sintering
The key to successful hot press sintering lies in the synergistic effect of 'heat' and 'pressure'. Heat reduces the deformation resistance of powders, promotes atomic diffusion, and forms a liquid phase to accelerate material migration. Pressure provides the driving force for densification, forcing particles to approach each other, undergo plastic deformation, and shrink pores, while enhancing the liquid phase filling effect.
4. Advantages of the Hot Press Sintering Process
High Density: Under pressure, products achieve near-theoretical density levels with extremely low porosity.
Superior Performance: High density delivers high strength, high hardness, and excellent wear resistance.
Enhanced Diamond Protection: Sintering is completed at relatively lower temperatures and in shorter durations, minimising thermal damage to diamonds.
Short process cycle: Simultaneous heating and pressurisation enable high production efficiency.
Controllable microstructure: Precise regulation of temperature and pressure curves yields the desired microstructural composition.
5. Key Control Parameters in Hot Press Sintering Process
Temperature Profile: Heating rate, sintering temperature, holding time. Temperature is pivotal in determining liquid phase volume and alloying degree.
Pressure Profile: Timing of pressure application, pressure magnitude, holding time. Pressure is the core driver of densification.
Atmosphere Control: Vacuum level or shielding gas purity to prevent oxidation.
Mould Design and Materials: Influences heating efficiency, pressure uniformity, and product dimensional accuracy.
The hot-press sintering technique for diamond saw blades represents an advanced manufacturing process that rapidly integrates diamond particles with metal matrix powder into high-performance cutting heads through precise, coordinated control of temperature, pressure, time, and atmosphere. It effectively "forges" a robust and perfectly matched metallic "base" for the diamond. The performance of this base-its wear resistance, shape retention, and holding power-directly determines the saw blade's sharpness, longevity, and efficiency during cutting operations. This represents a pivotal core technology within the diamond tool manufacturing sector.
