Drill bits are the most commonly used hole-making tools in manufacturing, construction, and everyday life. Their core function is to drill circular holes in workpiece.
1. Basic Structure: The 'body' of the drill bit.
A standard twist drill (the most common type of drill bit) primarily consists of the following components:
1) Shank: The part of the drill bit that is clamped.
Straight Shank: Cylindrical in shape, commonly used for smaller diameter drill bits, secured via a drill chuck.
Taper Shank: Features a Morse taper, used for larger diameter drills. The tapered section fits directly into the tapered bore of a machine tool spindle, transmitting torque via friction and resisting slippage.
2) Working Section (Body): Comprises the cutting and guiding elements.
Cutting Section (Point): The drill's tip, featuring a cross-edge and primary cutting edge responsible for penetrating material and removing chips.
Guiding Section (Margin & Land): Raised ridges along the helical flutes that guide the drill during boring, preventing deviation.
3) Flute: Two helical grooves. Primarily serve to evacuate chips and convey cutting fluid.
4) Neck: The transitional zone connecting the shank to the working section, typically engraved with drill specifications, material composition, and other relevant information.
2. Primary Classification.
The drill family is extensive, categorised primarily by workpiece material and application as follows:
1) By Material Type:
Twist Drill: The most versatile standard drill, featuring a helical flute design with a typical 118° point angle. Suitable for wood, plastics, and common metals.
Centre Drill: Short and thick with high rigidity, used to drill centre holes in the end faces of shaft-type workpiece to prepare for subsequent centre pin clamping. Primarily employed for shaft components.
Deep Hole Drill: Characterised by a high length-to-diameter ratio, featuring specialised chip evacuation structures or internal cooling channels. Designed for machining extremely deep holes, commonly employed in applications such as gun barrels and hydraulic valve blocks.
Core Drill: Possesses 3-4 cutting edges without a cross-edge. Unsuitable for direct drilling into solid material, it is exclusively used to enlarge existing holes, enhancing their precision and surface finish. Typically employed for semi-finishing operations on pre-drilled holes.
2) Classification by special function:
Carbide Drill: Featuring solid or segmented carbide construction, it exhibits exceptional hardness and wear resistance, making it suitable for high-speed cutting of materials such as cast iron, hardened steel, PCB boards, and fibreglass.
Index-able Drill / U Drill: Features replaceable cutting inserts in the drill head. When worn, the inserts can be rotated or replaced directly without regrinding the drill body. Suitable for large-diameter, high-efficiency machining, ideal for mass production of steel and cast iron components.
Step Drill: A single drill features progressively larger diameter steps, enabling the creation of stepped holes in a single operation or chamfering/deburring of thin plates. Primarily used for sheet metal and thin plate components.
Spot Drill: Short and rigid, typically featuring a 90° or 120° point angle. Used to create a pilot hole prior to drilling, preventing subsequent drill slippage or deviation. Primarily employed for positioning before precision hole machining.
Hole Saw: Cylindrical in shape with teeth only around its circumference. Used to cut large-diameter holes in thin plates, typically for applications such as installing lock holes in wooden doors or creating cable feed-through holes.
