Detailed Description of Diamond Saw Blade Tooth Profile (Part 2)

Jan 15, 2026

Leave a message

3. Key Considerations for Selecting Tooth Profile

Material to be cut: This is the primary factor.

Hard, brittle materials: Select continuous teeth or narrow, closely spaced teeth.

Hard, highly abrasive materials: Select trapezoidal teeth.

Soft, viscous materials: Select wide, widely spaced teeth or turbine teeth.

Materials requiring dry cutting: Must select turbine teeth or other profiles with strong chip evacuation.

Cutting Method: Wet or dry cutting? Dry cutting necessitates emphasis on chip evacuation and heat dissipation.

Required Cutting Quality: High surface finish demands continuous or close-set teeth; efficiency prioritization favors wide-set or turbine teeth.

Equipment Power: High-power machinery may employ tooth profiles with greater cutting resistance (e.g., continuous teeth); low-power equipment should utilize tooth profiles enabling smoother cutting (e.g., sparse teeth, turbine teeth).

 

Finally, when selecting saw blades, it is essential to comprehensively consider the interplay between three factors: the tooth profile, the diamond concentration/grain size (which determines wear resistance and sharpness), and the bond hardness (which dictates suitability for the material's hardness). Only through this integrated approach can the most appropriate diamond saw blade be chosen for specific working conditions.

Send Inquiry