110mm/4.33inch Continuous Rim Stone Cutting Blade By Wet Cutting

110mm/4.33inch Continuous Rim Stone Cutting Blade By Wet Cutting

110mm/4.33inch Continuous Rim Stone Cutting Blade by Wet Cutting
Product Model: B01-52
Product Specifications: 110D-20H-8X-1.6T
Segment Profile: Continuous Rim
Cutting Method: Wet Cutting
Send Inquiry
Description

The 110mm/4.33inch Continuous Rim Stone Cutting Blade by Wet Cutting is a cutting tool specifically designed for cutting hard and brittle materials such as stone, tile, and concrete under water-cooled conditions. It utilizes diamond particles embedded in the blade's cutting edge to continuously rub against and impact against the material being cut, grinding it into fine particles to achieve the cut. Water must be applied during cutting to ensure cutting efficiency and extend the blade's service life.

 

The 110mm/4.33inch Continuous Rim Stone Cutting Blade by Wet Cutting features a continuous-edge design, which facilitates wet cutting to ensure a smooth cut surface. It offers high cutting efficiency and precision with virtually no chipping. When cutting, water must be used for cooling; dry cutting is strictly prohibited, as excessive heat can damage the blade. It is generally suitable for professional stone processing applications requiring high-volume, continuous cutting, such as factories and large construction sites.

 

When cutting with an 110mm/4.33inch Continuous Rim Stone Cutting Blade by Wet Cutting, keep the following details in mind to ensure the blade lasts longer and to work more safely:

1. Installation must be correct. When installing the blade, make sure the arrow on the blade points in the same direction as the machine's rotation. Installing it backwards will severely affect cutting efficiency and create a hazard.

2. Always prioritize safety. Wear safety goggles during operation and ensure the saw is equipped with a guard to prevent sparks and debris from causing injury.

3. Pay attention to your technique. Let the tool's own weight guide the cut; do not force it down. If the blade feels dull, make a few cuts on firebricks or a scrap grinding wheel to expose fresh diamond grit.

4. Do not neglect the break-in period after installation. After installing a new blade, run it idle for 1–2 minutes to allow the blade and machine to fully seat. Only begin cutting once you have confirmed there is no wobbling or unusual noise.

 

110mm433inch Continuous Rim Stone Cutting Blade by Wet Cutting

 

Product Specifications

Model

Specification

Segment

Diameter

Bore Size

Segment Height

Segment Thickness

Weight

B01-52

110D-20H-8X-1.6T

Continuous Rim

110mm

20mm

8mm

1.6mm

99g

 

FAQ

Q: Why should you buy the products from me?
A: I have more experience in tools of every market and give you best support on price and quality according to your market.

Q: Which kind of products i can provide?
A: My products include Cutting tools, Grinding tools, Hole cutting tools, Glass cutting tools......

Q: How about customized service ?

A: Sure, no problem, OEM, ODM......Just tell me what you need.

Q: What is your MOQ?
A: Our MOQ usually is 100pcs, but we accept lower quantity for your trial order.

Q: What is your payment method?
A: T/T: Telegraphic Transfer (wire transfer), 30% down payment, balance before shipment.

Hot Tags: 110mm/4.33inch continuous rim stone cutting blade by wet cutting, China 110mm/4.33inch continuous rim stone cutting blade by wet cutting suppliers, factory, Continuous Rim Stone Saw Blade, Diamond Blades for Granite, Diamond Blades for Marble, Marble Bridge Saw Blade, stone cutting saw blade, Straight Tooth Stone Cutting Blade

Send Inquiry